MW

Home/MW Magazine
MW Magazine

About MW Magazine

This author has not yet filled in any details.
So far MW Magazine has created 116 blog entries.

August/September 2020

The August/September 2020 issue of Machinist’s Workshop mails out around July 15. Contents: The Bench Top Plastic Injection Molding Machineby Don Wiederhold A Spindle Lock for a Smithy Graniteby Carl Blum A Sanding Belt Adapter for a Unimat Latheby Peter Merriam Dragonfly Air Rifle: Part 5Leslie Proper Tools, Tips, Toys & TricksOne of a Kind Aluminum Penby, [...]

By |2020-07-06T12:14:27-04:00July 6th, 2020|Coming Soon|0 Comments

June/July 2020

The June/July 2020 issue of Machinist’s Workshop mails out around May 9. Contents: The Meade ETX-125 Telescope Tripod Upgradeby Jim Tucker Pipe and Rod Clampby William Alles A Chain Drilling Guide by R.G. Sparber Electrician's EMT Conduit Bending Bubble Level by Harold Scuterud The Dragonfly Air Rifle: Part Four by Leslie Proper Build a Leather Strap Cutter [...]

By |2020-04-29T08:04:38-04:00April 29th, 2020|Coming Soon|0 Comments

April/May 2020

The April/May 2020 issue of Machinist’s Workshop mails out around March 9. Contents: The Micrometer Stopby Jerrold Tiers Easy Mill Vise Alignmentby Edward P. Alciatore III Clutch Removal Tool by Don Wiederhold The Dragonfly Air Rifle: Part Three by Leslie Proper Power Feed for the Top Slide by Paul Anderson Tools, Tips, Toys & TricksA Safety Round [...]

By |2020-03-02T08:49:25-05:00March 2nd, 2020|Coming Soon|0 Comments

February/March 2020

The February/March 2020 issue of Machinist’s Workshop mails out around January 15. Contents: The A Primer on Picklingby Al Peterson Strap Wrench Centerby Ron Geppert My Shop 10by William Alles Dragonfly Air Rifle 10Leslie Proper Tools, Tips, Toys & TricksCross Hole Drill Bushingsby, Chuck St. Louis The Tool RoomDrill Press Improvementby James W. Hauser Shop Notes of [...]

By |2019-12-26T09:37:30-05:00December 26th, 2019|Coming Soon|0 Comments

December 2019/January 2020

The December 19/January 20 issue of Machinist’s Workshop mails out around November 15. Contents: The Dragonfly Air Rifle - PART ONEby Leslie Proper A Spring-Loaded Centerby Walter Yetman 5C Collet Attachment for a South Bend Heavy 10by Paul Holm Hydraulic Press - PART SEVEN: The Arbor Pressby William AllesSpindle Lock for a Bench-top Millby Harvey Kratz Tools, [...]

By |2019-11-26T10:54:15-05:00November 13th, 2019|Coming Soon|0 Comments

October/November 2019

The October/November 2019 issue of Machinist's Workshop mails out around September 15. Contents:   Fitting and Stabilizing a Milling Attachment on your Lathe by DENNIS SANDOZ A Shop PITA by FRED PRESTRIDGE A Universal Bench Grinder Tool Rest by JERRY L. SOKOL Placing Punch Marks with Older Eyes by Timothy J. Apps Making Threaded [...]

By |2019-08-28T10:58:49-04:00August 28th, 2019|Coming Soon|0 Comments
Go to Top