MW

/MW Magazine
MW Magazine

About MW Magazine

This author has not yet filled in any details.
So far MW Magazine has created 106 blog entries.

December 2017/January 2018

The December 2017/January 2018 issue of Machinist's Workshop mailed out around November 15. Contents: Another Way to Part by ALAN GOERTZ The Wohlhaupter Universal Facing and Boring Head by JOHN LINDO Taking On (Almost) More Than I Can Handle by RJ MARSHALL Chess Piece or Reducer Jack by RON GEPPERT Rotary Table Extensions by JIM NOLEN Top Notch Insert [...]

By |2018-06-05T11:40:05+00:00November 20th, 2017|Coming Soon|0 Comments

October/November 2017

The October/November 2017 issue of Machinist's Workshop mailed out around September 12. Contents: Machining a Propeller Shaft by PETER McKELVEY Belt Sander Repairs by JERRY L. SOKOL A Bench Block and Accessories by WALTER YETMAN Building the Handy Hacksaw by MICHAEL JENKS Fighting Friction by ROGER TAYLOR Rotary Tool Accessories by CHARLES ST. LOUIS Extending a Drill and Tap by GALE [...]

By |2018-06-05T11:40:05+00:00September 15th, 2017|Coming Soon|0 Comments

August/September 2017

The August/September 2017 issue of Machinist's Workshop mailed out around July 10. Contents: My Mega Plate by TOM McALLISTER Isolation Mounts for Shop Machinery by MIKE FENDLEY Lower Speeds for the Drill Press by GREGORY WHITNEY A Simple Rotary Table Clamp Set by GREG BUCCI A Basic Tool Post Grinder by JAMES McKNIGHT Diamond Toolholder Adapter by R.F. PIERCE Table Top [...]

By |2018-06-05T11:40:06+00:00July 10th, 2017|Coming Soon|0 Comments

June/July 2017

The June/July 2017 issue of Machinist's Workshop mailed out around May 10. Contents: Table Top Band Saw – Part One by WILLIAM ALLES Magnetic Soft Jaws by E. PAUL ALCIATORE III Removable Downfeed Arm for an RF-30 Mill/Drill by JOHN HERRMANN Repairing a Logan 9B Back Gear by MIKE FENDLEY Nifty Belt Grinder Modifications by PETER MERRIAM Metric Threading [...]

By |2018-06-05T11:40:06+00:00May 10th, 2017|Coming Soon|0 Comments

April/May 2017

The April/May 2017 issue of Machinist's Workshop mailed out around March 10. Contents: My Shop Made Rotary Table by WILLIAM ALLES Welding Urethane Belts by TED HANSEN Modifications for the Schumacher Flux Wire Welder by JAMES HORNICEK Fitting a Bridgeport Right Angle Adapter to a Millrite by HERB YOHE Square Tubing Steady Rest by DON WIEDERHOLD An Experimental Rifle Part [...]

By |2018-06-05T11:40:06+00:00March 14th, 2017|Coming Soon|0 Comments

February/March 2017

The February/March 2017 issue of Machinist's Workshop mailed out around January 10. Contents: Cam Lock Nuts: Mounting an A2 Chuck on a D1 Spindle by DAVID BOWLING Another Slow Speed Band Saw Attachment by ROGER TAYLOR Machine Guards by WILLIAM ALLES A Tip: Measuring O-Rings by E. PAUL ALCIATORE III Small Work on Big Lathes by JIM HANSEN Thread Cutting Calculations [...]

By |2018-06-05T11:40:06+00:00January 11th, 2017|Coming Soon|0 Comments